probst SPEEDY VS-140/200 Betriebsanleitung Seite 90

 The lifting device is ready for operation.
10 Decommissioning and recycling
10.1 Safety
The lifting device may only be decommissioned and prepared for disposal by qualified specialists.
10.2 Decommissioning the Lifting Device
1. Set the main switch to 0.
2. Park the lifting device securely.
3. If the lifting device is defective, clearly indicate this on the device.
4. Remove the suction plate.
5. If necessary, place a protection cover over the suction plate.
6. Store the lifting device so that it cannot be damaged and protect against unauthorized use.
10.3 Disposing of the Lifting Device
1. Decommission the lifting device.
2. Detach and dispose of the suction plate.
3. Detach and dispose of the vacuum generator.
4. Detach and dispose of the main body.
The product may only be taken out of service and prepared for disposal / recycling by qualified
personnel. Correspondingly existing single components (such as metals, plastics, liquids, bat-
teries/rechargeable batteries etc.) must be disposed of/recycled in accordance with the national-
ly/country-specific applicable laws and disposal regulations!
The product must not be disposed of in household waste!
52700015 / 52700016 / 52700019 / 52700020
Decommissioning and recycling
41