probst SPEEDY VS-140/200 Betriebsanleitung Seite 66

5 Transport and storage
5.1 Protective Equipment
 The following protective equipment is required for handling purposes:
• Protective work shoes
•
Sturdy work gloves
5.2 Checking the Delivery
The scope of delivery can be found in the order confirmation. The weights and dimensions are listed in the de-
livery notes.
1. Compare the entire delivery with the supplied delivery notes to make sure nothing is missing.
2. Damage caused by defective packaging or occurring in transit must be reported immediately to the carrier
and Probst.
5.3 Removing the Packaging
The device is supplied shrink wrapped on a pallet.
NOTE
Sharp knives or blades
Damage to components!
Ensure that no components are damaged while opening the packaging.
1. Remove labeled transport aids and securing devices.
2. Open and remove the shrink wrap.
3. Dispose of the packaging material in accordance with the applicable national laws and guidelines.
5.4 Transporting the Lifting Device
WARNING
Falling objects during handling of the components
Serious injury or death!
Ensure the lifting aids and slings used have the necessary specifications.
Ensure that any personnel involved in transporting with lifting devices or industrial trucks are
authorized and qualified to do so.
Secure the components according to national regulations before every handling operation.
52700015 / 52700016 / 52700019 / 52700020
Transport and storage
17