probst SPEEDY VS-140/200 Betriebsanleitung Seite 89

Maintenance
NOTE
Aggressive cleaning agent
Damage to the suction plates and vacuum hoses!
rachloride, hydrocarbons or vinegar cleaners.
•
Clean the suction plates at least once a week with a soft brush and an active cleaning agent containing
surfactants (pH-neutral).
•
Clean mechanically at the same time (soft brush or ultrasound).
•
Allow to dry at room temperature.
•
Replace damaged or worn suction plates (e.g. with cracks, holes or ripples) immediately.
•
Always replace all suction plates on multiple suction pads!
9.7 Replacing Sealing Lip
1. Carefully tilt the lifting device onto its side.
2. Remove the sealing lip (6.2) from the suction
plate (6).
3. Remove the protective film from the new sealing
lip.
4. Press the new sealing lip (6.2) into the suction
plate.
40
Do not use aggressive cleaning agents such as cold cleaners, carbon tet-
Do not use sharp-edged objects (wire brushes, sandpaper, etc.).
52700015 / 52700016 / 52700019 / 52700020