probst SPEEDY VS-140/200 Betriebsanleitung Seite 77

Operation
7.6.1 Using the optional VS-140-XL-HG Operator Handle
When lifting and moving large-format stone slabs (up to 1.2 m wide), the long handles - VS-140-XL-HG (for
VS-140/200) should always be installed instead of the standard operator handles. This makes it possible to
remove the feet from the danger zone.
•
In principle, the long handles are mounted in the
same way as the standard handles (operating
handles) → see chapter „Rotating the Operator
Handle by 90°"
7.7 Switching on the Lifting Device
1. Connect the mains plug (13) to the power supply
with a suitable cable (not included in delivery).
2. Attach the cable to the operator handle (5) with
the Velcro strap (13.1).
3. Ensure that the mains plug (13) cannot acci-
dentally be unplugged.
4. Set the main switch (2) to 1.
•
Do not place the lifting device with a running vacuum generator on an airtight surface.
• Switch off the vacuum generator when taking a break of more than two minutes.
28 52700015 / 52700016 / 52700019 / 52700020