Coltene Coltolux Led Benutzerhandbuch Seite 7

Owner's Guide
XVI. The following are guidance and manufacturers declarations regarding electromagnetic compatibility for Coltolux
1.1 EN/IEC 60601-1-2 Table 1
The Coltolux
®
user of the Coltolux
Emissions Test
RF emissions CISPR 11:2004
RF emissions CISPR 11:2004
Harmonic emissions
IEC 61000-3-2
Voltage flucuations/Flicker emis-
sions IEC 61000-3-3
Guidance and Manufacturers Declaration -- Electromagnetic Emissions
LED is intended for use in the electromagnetic environment specified below . The customer or end
LED should assure that it is used in such an environment .
®
Compliance
Group 1
Class B
Class A
Complies
Electromagnetic environment guidance
The Coltolux LED uses RF energy for its internal fun-
®
ction . Therefore, its RF emissions are very low and are
not likely to cause any interference in nearby electronic
equipment .
The Coltolux LED unit is suitable for use in all establish-
®
ments other than domestic and may be used in dome-
stic establishments and those directly connected to the
public low-voltage power supply network that supplied
buildings for domestic purposes, provided the following
warning is heeded:
WARNING: This equipment is intended for use by
healthcare professionals only. This equipment may
cause radio interference or may disrupt the operation
of nearby equipment. It may be necessary to take
mitigation measures such as reorienting or relocating
the Coltolux LED unit or shield the location.
®
7
LED.
®