hanseatic HACM121470ST Bedienungsanleitung Seite 52

Page EN-16 Operation
Adding coffee beans
1 . Remove the cover (1) from the
coffee bean container (12) .
2 . Fill with approximately as many
coffee beans as you use in a
day .
3 . Replace the cover on the cof-
fee bean container . Push the
cover all the way in .
Rinsing processes
The appliance rinses the coffee
and milk outlet automatically when
it was switched on from cold status
(<45 °C) .
Automatic rinsing works only if the
drip tray (8) is installed .
To start rinsing manually:
• Press and hold the buttons
(13) and (14), until the appli-
ance beeps twice .
The coffee and milk outlet (5) is
rinsed .
You can interrupt the auto-
matic rinse by pressing the
cleaning button
(1)
Preparing coffee without
(12)
milk
Fill the appliance with water and
coffee beans as described in the
'Preparations' chapter .
1 . Place a cup under the coffee
outlet (5) .
2 . Press the on/off button (13) to
switch the appliance on .
3 . You can adjust the height of the
coffee outlet to the cup size . To
do this, slide the coffee outlet
up or down .
• Press the
You can adjust the amount of water
for your coffee (see chapter 'Fur-
ther settings') .
(15) .
button (18) once .