Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
CAUTION
Risk of scalding!
During the rinsing process
after switching on, hot water
runs out of the coffee spout
into the drip tray below.
Make sure that you do not
■
come into contact with
splashes of water.
Requirements for safe use:
– You have read the "Safety"
chapter and understood all sa-
fety instructions .
– The appliance has been set up
as described in the "First use"
chapter .
– You have cleaned the appliance
as described in the "Cleaning
and care" chapter .
Operation
Preparations
• Push the drip tray with drip grid
(8) all the way onto the appli-
ance until it clicks into place .
• Connect the appliance to the
power supply .
Filling the water tank
1 . Pull the water tank (11) up-
wards out of the appliance .
2 . Remove the protection foam
pad from the bottom of water
tank .
3 . Fill the water tank with fresh
water .
The 'Max' mark must not be
exceeded .
4 . Replace the water tank in the
appliance .
Page EN-15
(11)
Werbung
