Werbung
Lenord+Bauer
Material damage due to incorrect handling of the measuring surface!
The measuring surface is highly magnetic. Metallic objects in the vicinity of the prod-
uct can quickly result in sudden contact with the measuring surface. This can dam-
age the sensor elements and cause the measuring system to fail.
●
Avoid sudden contact between the measuring surface and other objects.
●
Observe the assembly sequence.
The measuring surface is printed with a protective layer. If the protective layer is de-
stroyed or removed, the measuring system may be damaged.
●
Do not destroy or remove the protective layer on the measuring surface.
Material damage due to the application of force!
The product is a precision device. Impacts or other applications of force can dam-
age the product.
●
Do not hit or step on the product.
●
Avoid hard knocks.
●
Do not bend any connector contacts.
●
Do not drop the product.
The original packaging protects the product from shocks.
●
Store and transport the product only in its original packaging.
●
Do not remove the product from its original packaging until you are at the instal-
lation site.
GEL 2444M
Possible hazards
2 Safety
63
Werbung
