Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Welding current cannot be regulated
insufficient welding current
Wire feeder does not work
In the event of a malfunction that you cannot rectify yourself, please contact our customer
service.
Specifications
inverter type
voltage
welding current
spool holder
MAG wire diameter
material thickness
wire feed roll
no load voltage
duty cycle
protection/isolation class
MAG torch
dimensions w x h x d
weight
Technical changes reserved.
The device overheats
Duty cycle exceeded
give the device time to cool down
Fan defective
Device ventilation affected by dust (perform
maintenance)
ground contact insufficient
Cable connections on the device are not tight
Potentiometer defective
Extension cord too long / cross section not
sufficient
Wrong side of the wire feed roller inserted
Contact pressure of the pressure spring too
strong or too weak
Wire dirty / corroded
IGBT-inverter
1 phase 230V, 50/60Hz
20-160 A
100 mm an 200 mm spools (D100, D200)
0,6/0,8/0,9 mm
0,9-4,0 mm
W-type
62 V
30%: 160 A // 100%: 88 A
IP21S
MB 150
260 x 340 x 510 mm
11 kg
43
Werbung
