Auxiliary Input Socket - Perfectpro Ub400R2 Bedienungsanleitung

Auxiliary input socket

The 3.5mm Aux In socket is to connect audio source like
MP3 player or CD walkman and listen the audio program
via radio speaker.
1. Connect a stereo or mono audio source (like CD
walkman or MP3 player) to the Aux In socket, which is
located on the side, behind the rubber cover.
2. Press the Power On/Off button to switch on your radio.
3. Press the Source button until "Auxiliary Input" mode is
shown on the display.
4. Play the file in the CD walkman or MP3 player.
5. Adjust the volume control to the required level.
Note:
Make sure the rubber cover of the Aux In socket is closed
well after use to prevent moist and dirt from entering
the radio. Never use the Aux In socket in rainy or moist
conditions to prevent moist from entering the radio. Keep
the rubber cover always closed under these conditions.
GB
42