Scan Sensitivity Setting - Fm - Perfectpro Ub400R2 Bedienungsanleitung

Scan sensitivity setting – FM
Your radio will normally scan for FM broadcasts which are
strong enough to give good reception. However, you may
wish the Auto-scan function to also be able to find weaker
signals, possibly from more distant radio transmitters.
Your radio includes "Strong stations only" and "All
Stations" options for the Auto-scan function.
1. Press the Power On/Off button to switch on your radio.
2. If needed, press and release the Source button until the
FM band is selected.
3. Press and hold the Info/Menu button to access FM
menu. Rotate the Tuning control knob until "Scan
setting" shows on the display. Press and release
the Tuning control knob to enter the scan sensitivity
adjustment mode. The current setting will be marked
with an asterisk.
4. Rotate the Tuning control knob to switch between
"Strong stations only" and "All Stations" options on the
lower line of the display. The "All Stations" option will
allow the radio to find weaker signals when scanning.
5. Press and release the Tuning control knob to confirm
your selection. The setting is stored in the radio and
remains in force until changed or until a System Reset.
GB
22