Factory Reset - Perfectpro Ub400R2 Bedienungsanleitung

Factory reset

If your radio fails to operate or some digits on the
display are missing or incomplete, carry out the following
procedure.
1. Press the Power On/Off button to switch on your radio.
2. Press and hold the Info/Menu button to access the
menu for the current mode.
3. Rotate the Tuning control knob to select "System" and
press the Tuning control knob to enter the system
settings menu.
4. Rotate the Tuning control knob to select "Factory
Reset" and press the Tuning control knob to enter the
setting.
5. Rotate the Tuning control knob to select "Yes" or "No".
If you do not wish to carry out a system reset, select "No"
and then press the Tuning control knob to confirm the
setting.
6. With "Yes" selected, press the Tuning control knob. A
full reset will be performed. All presets and station lists
will be erased. All settings will be set to their default
values. After a system reset, the radio will be restarted.
The display will show "Welcome to Digital Radio" and
a scan of the DAB band III will be performed. In case
of malfunction due to electrostatic discharge, reset
the product (reconnection of power source may be
required) to resume normal operation.
FM
<System >
System
<Factory Reset >
Factory Reset?
Yes <No>
GB
38