Herunterladen Inhalt Inhalt Diese Seite drucken

PERFECTPRO UB400R2 Bedienungsanleitung Seite 25

Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

Listening music via Bluetooth streaming
You need to pair your Bluetooth device with your UBOX 400R
before you can auto-link to play/stream Bluetooth music
through your UBOX 400R. Pairing creates a 'bond' so the
two devices can recognize each other.
Pairing and playing your Bluetooth device for the first
time
1. Press the Power On/Off button to switch on your
radio and press the Source button to select Bluetooth
function. "Bluetooth Pairing" will show on the display.
The Bluetooth status indicator (
flash a fast blue to show the radio is discoverable.
2. Activate Bluetooth on your device according to the
device's user manual to link to the radio. Locate the
Bluetooth device list and select the device named
'UBOX 400R' (With some Smartphone's that are
equipped with earlier versions than BT2.1 Bluetooth
device, you may need to input the pass code "0000").
3. Once connected, there will be a confirmation tone
sound and the name of your connected Bluetooth
device will show on the display. The Bluetooth status
indicator (
) will turn a solid blue. You can simply
select and play any music from your source device.
The volume control can be adjusted from your source
device, or directly from the radio.
4. Use the controls on your Bluetooth-enabled device or
on the radio to play/pause and navigate tracks.
(Note: To disable Bluetooth status indicator (
please refer to the later section "Bluetooth status
indicator On/Off".)
Note:
1). If 2 Bluetooth devices are pairing for the first time,
) on the radio will
2). If you take your source device out of range, the
3). If 'UBOX 400R' shows in your Bluetooth device list but
4). The effective operation range between the system
both will search for your radio, it will show its
availability on both devices. However, if one device
links with this unit first, then the other Bluetooth
device will not find it on the list.
connection will be temporarily disconnected to your
radio. Your radio will automatically reconnect if the
source device is brought back in range. Be aware that
during the period of disconnection, no other Bluetooth
device can pair or link with your radio.
your device cannot connect with it, please delete the
item from your list and pair the device with the radio
again following the steps described previously.
and the paired device is approximately 10 meters
(30 feet). Any obstacle between the system and the
GB
),
24
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ubox 400r

Inhaltsverzeichnis