Softwareversion - Perfectpro Ub400R2 Bedienungsanleitung

Software version
The software display cannot be altered and is just for your
reference.
1. With your radio switched on, press and hold the Info/
Menu button to access the menu for the current mode.
2. Rotate the Tuning control knob to select "System" and
press the Tuning control knob to enter the system
settings menu.
3. Rotate the Tuning control knob until "SW version"
appears on the display and press the Tuning control
knob. The software version shows on the display.
4. Press and release the Info/Menu button to exit the
software version display.
41