Loudness On/Off - Perfectpro Ub400R2 Bedienungsanleitung

Bluetooth status indicator On/Off
1. Press the Power On/Off button to switch on your radio.
2. Press the Source button to select Bluetooth mode.
3. Press and hold the Info/Menu button to enter Bluetooth
menu.
4. Rotate the Tuning control knob to select "BT led". Press
and release the Tuning control knob to enter the setting.
The current setting will be marked with an asterisk.
5. Rotate the Tuning control knob to select "On" or "Off".
If "On" is selected, the Bluetooth status indicator (
on the radio will flash a fast blue to show the radio
is discoverable. When the radio connected with your
Bluetooth device, the Bluetooth status indicator (
will turn a solid blue. Press the Tuning control knob
to confirm your setting. To disable Bluetooth status
indicator, select "Off" and press the Tuning control knob
to confirm the setting.

Loudness On/Off

When the radio is switched on, press the Loudness On/
Off button to get compensation on lower and higher
frequency. The effect will be more audible when the radio
is in lower volume level. Display will show Loudness on
when Loudness function is applied.
29
)
)