Brightness Control - Perfectpro Ub400R2 Bedienungsanleitung

Brightness control

The brightness of the display can be adjusted for when
the radio is in standby and for when it is in use. If you use
the unit in the bedroom, you may prefer a lower standby
brightness level than a higher brightness setting.
1. Press the Power On/Off button to switch on your radio.
2. Press and hold the Info/Menu button to access the
menu for the current mode.
3. Rotate the Tuning control knob to select "System" and
press the Tuning control knob to enter the system
settings menu.
4. Rotate the Tuning control knob to select "Backlight"
and press the Tuning control knob to enter the setting
menu.
5. In Backlight menu, there are 3 settings:
Time out: to adjust the length of time before the backlight
turns off.
On level:
to adjust the brightness when the radio is in
use.
Off level: to adjust the brightness when the radio is in
standby.
Rotate the Tuning control knob to select your option and
press the Tuning control knob to confirm your setting.
FM
<System >
System
<Backlight >
Backlight
<Timeout >
Backlight
<On level >
Backlight
<Off level >
GB
36