Using The Radio For The First Time - Perfectpro Ub400R2 Bedienungsanleitung

Using the radio for the first time

1. Place your radio on a flat surface.
2. Straighten up the antenna.
3. Plug the AC power cord into an AC socket. The display
will show "Welcome to Digital Radio" for a few seconds.
After short time, the current time will appear on the
display.
4. If no time is displayed, the screen will show "00:00".
Press the Power On/Off button to turn on your radio
and it will find a DAB clock radio stations. It may be
necessary to relocate your radio to a position giving
better reception and carry out a scan to find stations as
described in later sections.
IMPORTANT:
The mains plug is used as the means of connecting the
radio to the mains supply. The mains socket used for
the radio must remain accessible during normal use. In
order to disconnect the radio from the mains completely,
the mains plug should be removed from the mains outlet
completely.
11
Welcome to
Digital Radio