Abus MODUVIS Bedienungsanleitung Seite 87

Important notes:
Compatibility to TVHS20xxx 2-wire and TVHS20xxx PoE door intercom system:
The TVHS21010/S is fully downward compatible with the TVHS20000/S. Existing
installations can easily be extended by the TVHS21xxx series. The new module includes the
following innovations:
Important Information:
Please note the following compatibility of the 2-wire components with the respective 2-wire
distribution module.
TVHS20310 2-wire distributor is only compatible with TVHS20010/S video module and
TVHS20210 monitor.
TVHS21310 2-wire distributor is only compatible with TVHS21010/S video module and
TVHS21210 monitor.
To integrate a TVHS21210 monitor into an existing TVHS20x10 MODUVIS system, the
TVHS21310 converter must be connected to the same network via an RJ45 socket.
TVHS20310 and TVHS21310 must not be cascaded via "In" / "Out" 2-wire. To connect the
converters to the same network, please only use the RJ45 LAN port.
• Web interface available (plugin required)
• SIP prepared
• Power supply of electric strike via door module (12V DC, max.500mA)
• By means of the numeric keypad TVHS20030/S, the second relay in the door module
can now also be controlled (4-to-6-digit PIN).
• Up to 4 external bell buttons for 4 flats can be connected directly to the module (via
switching input)
• Improved image quality without distortion / fisheye effect
• Nameplate with silicone insert for sealing
• Backlighting of the nameplates/bell buttons can also be switched on and off via
schedule or manually
• Direct call of the ABUS CMS software
87