Functional Scope Of; Compatibility With - Abus Moduvis Bedienungsanleitung

9.12 Functional scope of MODUVIS and ABUS Link Station APP
The MODUVIS door intercom system can be integrated into the ABUS Link Station APP. The
following options are available:
Change
Add:
Share device
Push options:
Open door:
Event log:
9.13 Compatibility with ABUS products & network cameras
This section deals with possible interaction with other ABUS products.
ABUS product
Secvest
WAppLoxx
WAppLoxx Pro
ABUS IP cameras
ABUS NVR
ABUS Link Statiom APP
A variety of ABUS network cameras can be integrated into the ABUS door intercom
"MODUVIS" (models: TVHS2xxxx) and viewed on the door intercom monitor.
Please note that only the live image can be accessed. Recordings and special functions such
as PTZ etc. are not supported.
On the TVHS21xxx series, cameras can also be used as a standard camera if desired to
appear on the screen during a ringing event.
All ABUS network cameras that have been available since 2020 of the IPCAxxxx, IPCBxxxx
and IPCSxxxx series and TVIPxxxx are compatible with the ABUS MODUVIS.
Many camera series before 2020 are also compatible. Here you have to make sure that the
respective camera has "Port 8000". Only then is the camera model compatible.
verification code:
changed in the menu item "ABUS Link Station Service". To do
this, click on the currently displayed code.
Scan the QR code and add the device to the APP.
also necessary to enter the verification code.
The door intercom can be shared with other users. This
gives several people or apps access to the system.
When the door intercom rings, the ABUS Link Station app can
be called directly or with a delay. The call can be accepted via
the app and intercom with the video of the door station is
possible. If reception quality or mobile bandwidth is limited, the
video can be deactivated and only spoken.
Relay 1 or relay 2 can be switched via the app. This can be
used to operate electric strikes, for example.
The app has a message page with entries of the last doorbell
activities with an event image.
Compatibility
No
Relay circuit
Relay circuit
See compatibility notes below
Integration of the door station video, see section 9.14
Calling up the live image of the door station
Push message for blades
141
The verification code should first be
It is