Setting The Volume On The; Connection Of An Existing Front Doorbell - Abus Moduvis Bedienungsanleitung

9.4 Setting the volume on the TVHS21010(S) door video module
The microphone sensitivity and voice volume on the door video module can be set via the
ABUS CMS software or the door module's web interface. You can also set or completely
deactivate the confirmation tones / call dialling tones / busy character volume or store your
own tones.
For further information, please refer to the web interface instructions for the door module.
9.5

Connection of an existing front doorbell

If you already have an existing front door bell / chime, this can be connected to relay output 1
(COM / NO l) of the monitor.
The relay may be loaded with a maximum of 2A @ 30VDC or 0.5A @
125AC.
When a bell is rung, the relay is then switched at the desired interval and duration. The
configuration of "Relay 1" can be found in the monitor menu under "Relay configuration".
Like the local ringtone on the monitor, the relay is activated for as long as is set under
"Ringtone duration" in the "Call settings" menu.
If you only want to hear the ringing of your external house chime, you can simply activate or
deactivate the ringtone on the monitor in the "Call settings" in the "Activate ringtone" menu.
131