Emergency Door Opener - Abus Moduvis Bedienungsanleitung

9.15 "Emergency door opener" button on door video module
A button/switch can be attached directly to the door video module via alarm input 3 (AIN 3 =
relay 1) and alarm input 4 (AIN 4 = relay 2), which switches the door relay when actuated.
To activate alarm input 3 (AI3 and AI4), open the web interface of the respective door video
module with the ABUS CMS software and configure the respective input to "Exit button"
under "Intercom" in the I/O settings.
The AIN3 of the door video module now opens the door of relay 1
The AIN4 of the door video module now opens the door of relay 2
For security reasons, this function is deactivated on delivery.
For further details, please refer to the web interface instructions for the TVHS21010.
143