Call Functions - Abus Moduvis Bedienungsanleitung

The relay outputs are located at the rear of the monitor and can be connected using the
cable whip supplied. The pin assignment is printed on the back of the monitor.
Relay 1 is switched between COM1 and NO1, relay 2 is tapped at COM2 and NO2.
Button / Display
Relay 1
Duration
Interval
Relay 2
For more information, read the chapters "9.6
door station monitor" and "9.5
Installation and commissioning instructions section.
You can also find information on the following topic here: "9.8
opener to video module (incl. "garden gate")"
5.2.5.7
Here you can set whether a message can be left when a call is received and whether a photo
should be saved. The time can be set to one day, seven days and 30 days.
Description of the
Activates / deactivates the function of an additional (or an existing)
house bell. Relay 1 on the monitor is triggered in parallel with a call.
Defines the duration for which the relay for the additional doorbell is
triggered by a doorbell call.
Defines the interval at which the relay triggers the additional
doorbell for the set "Duration" when the doorbell is rung.
Activates / deactivates the additional switching output on the
monitor (e.g. for a door opener on the flat door on the respective
floor). When the function is activated, an additional "key symbol"
labelled "3" appears on the local monitor.
Connection of an existing front doorbell " in the

Call functions

Connecting existing door openers to the
Connection of electric door
125