Instructions For Measuring The Existing Door Opener - Abus Moduvis Bedienungsanleitung

9.17 Instructions for measuring the existing door opener

If you want to control an existing door opener and have no information about the power
consumption, you must determine whether the maximum current consumption will not
overload the relay before connecting it to the relay of the door video module.
To do this, use a multimeter to measure the current consumption of the door opener in the
current measuring range (A) connected in series.
9.18Application example "Video module in front of every flat door"
There is often a desire to place a video module in front of every flat door in a block of flats in
order to obtain a 180° video of the area in front of the flat door (door viewers are usually quite
acute angled in their field of vision).
This can be programmed for up to 16 flat doors using the "Side entrance" function in the
video module.
The respective assignment of the bell button (assignment to the correct apartment) is made
in the web interface of the door module under "Press button to call" , see the TVHS21010
web interface instructions.
LAN variant
145