PeakTech 2005 Bedienungsanleitung Seite 57

F1 200mA / 600V F : 5 x 20 mm
F2 10 A / 600V F: 5 x 20 mm
Follow these steps to replace the fuse:
1. Turn off the meter and disconnect the test leads.
2. Remove the screw on the battery cover, remove the
battery cover and remove the old battery, too.
3. Remove the defective fuse and replace it with a new
one with the correct specified voltage and current
ratings.
4. Replace the battery and replace the battery cover
on the case and secure it with the screw.
-56-