PeakTech 2005 Bedienungsanleitung Seite 33

* Never touch the tips of the test leads or probe.
* Comply with the warning labels and other info on the
equipment.
* Always start with the highest measuring range when
measuring unknown values.
* Do not subject the equipment to direct sunlight or
extreme temperatures, humidity or dampness.
* Do not subject the equipment to shocks or strong
vibrations.
* Do not operate the equipment near strong magnetic
fields (motors, transformers etc.).
* Keep hot soldering irons or guns away from the
equipment.
* Allow the equipment to stabilize at room temperature
before taking up measurement (important for exact
measurements).
* Do not input values over the maximum range of each
measurement to avoid damages of the meter.
* Do not turn the rotary function switch during voltage or
current measurement; otherwise the meter could be
damaged.
* Use caution when working with voltages above 35V DC
or 25V AC. These Voltages pose shock hazard.
* Replace the battery as soon as the battery indicator
"BAT" appears. With a low battery, the meter might
produce false reading that can lead to electric shock and
personal injury.
* Fetch out the battery when the meter will not be used for
long period.
* Periodically wipe the cabinet with a damp cloth and mid
detergent. Do not use abrasives or solvents.
* The meter is suitable for indoor use only.
-32-