Dometic POWER & CONTROL CAM360AHDHD Montage- Und Bedienungsanleitung Seite 35

3. Enter the new password in the text filed New and Confirm.
NOTE
4. Use the Save button.
A window appears to confirm the change.
5. If necessary, use the No button to cancel the change.
6. Use the Yes button to save the change.
7. Log in (see Logging in
10.9 Setting the time
1. Open the Setup.
The SETUP settings are displayed.
2. Open the Time settings.
The System Time Setup is displayed.

3. Make the desired settings.
Setting the date and Time
1.
Use the and
The position of the cursor is highlighted.
• The password can consist of numbers and letters. The password is limited to 16 charac-
ters.
• When exiting the Password Setup without saving, the password change is dis-
carded.
on page 34).
buttons on the remote control to set the desired time.
35