10.8
Using the login menu
NOTE
•
If the password is forgotten, contact the manufacturer to request a key for resetting the
password.
•
After logging in the password must be entered again if the camera system menu, settings,
or calibrations have not been used for 10 min, rebooting the camera system, deactivating
the standby mode, or the camera system is switched on again after being switched off.
Logging in
1.
Enter the password.
NOTE The default password is 88888888.
2. Use the Login button.
When the wrong password has been entered Login failed. is displayed.
When the correct password has been entered, the main menu is displayed.
3. If necessary, restart at step
Changing the password
1.
Use the
button.
The Password Setup is displayed.
2. Enter the old password in the text filed Current.
34
1
on page 34.