G&D VisionXS-IP-F-TypeC-UHR Installation Und Bedienung Seite 183

Start-up
Showing terms of use
If the terms of use are displayed, they must be accepted before each (new) device
access.
How to configure the display of terms of use:
1. Press the Ctrl+Num
2. Select the
System setup
3. Select the Terms Of Use Config
4. Select the Terms of use
off:
User:
DoD Notice:
5. If you selected User in the previous step, the individual terms of use must be
entered in the next step. Select the
6. Now enter the text that a user is shown before accepting the terms of use
( : I have read the terms of use and hereby agree to them). This text field is limited
example
to 70 characters.
7. Press F2 to save the text.
8. Press Esc to return to the previous screen.
9. Select the
Long text...
10.Now enter the desired terms of use. This field is limited to 1,500 characters.
11.Press to save the text.
F2
12.Press Esc and then
36 · G&D VisionXS-IP-F-TypeC-UHR
(default) hotkey to open the OSD.
entry and press
line and press
entry and press
No terms of use are displayed during log in (default).
Individual terms of use are displayed during log in.
The terms of use of the US Department of Defense are used dur-
ing log in (can only be selected if the optional SecureCert fea-
ture is activated).
Short text...
entry and press
Enter
F2 to save your settings.
.
Enter
Enter .
F8 to select one of the following options:
entry and press
.
.
Enter