How to configure the minimum number of lowercases within a password:
1. Press the
Ctrl+Num
2. Select the
System setup
3. Select the
Password Complexity
4. Select the
Min. lowercase
5. Enter the desired minimum number of lowercases within a password
(Default: 0 or 1 with activated SecureCert-Feature)
6. Press
to save your settings.
F2
How to configure the minimum number of digits within a password:
1. Press the
Ctrl+Num
2. Select the
System setup
3. Select the
Password Complexity
4. Select the
Min. digits
5. Enter the desired minimum number of digits within a password
(Default: 0 or 1 with activated SecureCert-Feature)
6. Press
F2
to save your settings.
How to configure the minimum number of special characters within a password:
1. Press the
Ctrl+Num
2. Select the
System setup
3. Select the
Password Complexity
4. Select the
Min. special characters
5. Enter the desired minimum number of special characters within a password
(Default: 0 or 1 with activated SecureCert-Feature)
6. Press
F2
to save your settings.
(default) hotkey to open the OSD.
entry and press
Enter
line and press
line and press
Enter
(default) hotkey to open the OSD.
entry and press
Enter
line and press
line and press
Enter
.
(default) hotkey to open the OSD.
entry and press
Enter
line and press
line and press
.
Enter
.
.
.
Enter
.
.
Enter
.
.
Enter
G&D VisionXS-IP-F-TypeC-UHR · 33
Start-up