Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Establishing a connection to the Gigabit Ethernet
IMPORTANT:
The devices use components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE:
Remove the protection caps from the Transmission interfaces and from the
cable plug.
Insert the LC plug of a fibre optic cable, which is available as
Transmission 1|Tx:
accessory, into this interface. Connect the other end to the Gigabit Ethernet.
Insert the LC plug of a fibre optic cable, which is available as
Transmission 1|Rx:
accessory, into this interface. Connect the other end to the Gigabit Ethernet.
NOTE:
The activation of the
interface.
To use the
Transmission 2
Choose the right
SFP transceiver
series. The
Transm. Redundancy options
and the
Transm. Redundancy feature
Use this interface to establish a redundant transmission connection (link aggregation)
with the Gigabit network.
feature activates the
Transm. Redundancy
interface, you need an additional SFP transceiver.
for your variant of the
contain both, a corresponding
.
G&D VisionXS-IP-F-TypeC-UHR · 19
Installation
Transmission 2
VisionXS-IP-F-TypeC-UHR
SFP transceiver
Werbung
