G&D VisionXS-IP-F-TypeC-UHR Installation Und Bedienung Seite 169

Installation
2. Establish a new connection in the terminal emulator and enter the following settings:
 Bits per second: 115.200
 Data bits:
 Parity:
 Stop bits:
 Flow control:
3. Use a data cable to connect the computer to the Service port at the front panel of the
VisionXS-IP .
NOTE:
To log in into the service menu, enter the user name service and the pass-
word service. The service menü is freely accessible on devices with SecureCert feature
activated.
4. In the service menu, you have the following options:
 Quit ( not visible on devices with SecureCert feature activated)
 System information
 Set system defaults: A confirmation Are you sure? [y]es, [N]o (default) is displayed.
 Reboot: A confirmation Are you sure? [y]es, [N]o (default) is displayed.
22 · G&D VisionXS-IP-F-TypeC-UHR
8
none
1
none