Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Start-up
Configuring the password complexity
You can configure password complexity to comply with your individual password
guidelines and improve security.
IMPORTANT:
Changes in the section of password complexity have
existing passwords, but are only taken into account when a password is changed
(see Changing the password of a user account on page 77) and a new user account is
created (see Creating a new user account on page 75). You should therefore configure
the password complexity as early as possible.
How to configure the minimum password length:
1. Press the
Ctrl+Num
2. Select the
System setup
3. Select the
Password Complexity
4. Select the
Min. length
5. Enter the desired minimum password lenght (Default: 3 or 15 with activated
SecureCert-Feature)
6. Press
F2
to save your settings.
How to configure the minimum number of capital letters within a password:
1. Press the
Ctrl+Num
2. Select the
System setup
3. Select the
Password Complexity
4. Select the
Min. capital letters
5. Enter the desired minimum number of capital letters within a password
(Default: 0 or 1 with activated SecureCert-Feature)
6. Press
to save your settings.
F2
32 · G&D VisionXS-IP-F-TypeC-UHR
(default) hotkey to open the on-screen display (OSD).
entry and press
line and press
line and press
Enter
(default) hotkey to open the OSD.
entry and press
line and press
line and press
.
Enter
Enter
.
.
Enter
.
.
Enter
Enter
.
effect on
no
Werbung
