Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Establishing the power supply
NOTE:
All device variants of the
power supply at the
Power
The illustrations in this chapter show the DT variant of the device series. This var-
iant is additionally equipped with an internal power supply (
Power/Main Power:
Connect an external power supply to this interface.
Red Power:
.To provide a second, redundant power supply, insert an IEC cables here.
IMPORTANT:
All G&D devices have information printed on them regarding their
power consumption. Please ensure that the power pack you are using provides at
least the required amount of power.
Our support will gladly assist you in ensuring that your device is supplied with
power correctly.
If the device is not supplied with adequate power, it may not operate as expected
and its function may be permanently impaired!
NOTE:
The product supports USB Power Delivery. The product can only be used
as a power receiver (sink).
IMPORTANT:
The sole power supply via USB Power Delivery is
cute updates.
Type-C/DP Out/USB K/M:
VisionXS-IP
interface (for DT variants:
Connect the console monitor
series can be operated with an external
Main Power
).
Red. Power
not
G&D VisionXS-IP-F-TypeC-UHR · 27
Installation
).
sufficient to exe-
Werbung
