Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The VisionXS-IP-F-TypeC-UHR series
IMPORTANT:
Data transmission of devices of the
devices of other series! The devices of the KVM-over-IP series are compatible with
each other.
KVM extenders of the
and a console module.
Connect the computer to be operated to the computer module (
remote console is connected to the console module (
Both the computer module and the console module are connected using two optical
fibres.
NOTE:
You can also use a cable to establish a direct connection between computer
module and console module.
Signals of keyboard, mouse and video (DP1.2 alt mode) of the computer connected
are transmitted using these fibres and enable you to operate the computer remotely.
Use as extender or matrix switch modules
You can use the modules as either extender or matrix switch modules:
Extender modules:
Configure a KVM-over-IP connection between the computer
and the console module. The configured connection between the modules is
restored each time the modules are restarted.
ADVICE:
Use the
IP-MUX
available in the OSD via separate computer modules.
Matrix switch modules:
ControlCenter-IP-XS
, you can use the modules as end devices of the matrix switch.
In this case, configure a KVM-over-IP connection to the IP matrix switch for the
modules.
In this configuration, the IP matrix switch enables the flexible connection of a con-
sole module to a computer module.
VisionXS-IP-F-TypeC-UHR
functionality (see page 50 ff.) to make up to 20 computers
In combination with the IP matrix switch
The VisionXS-IP-F-TypeC-UHR series
IP
series is not compatible to G&D
series consist of a computer module
VisionXS-IP-CPU
VisionXS-IP-CON
).
ControlCenter-IP
G&D VisionXS-IP-F-TypeC-UHR · 5
). The
or
Werbung
