Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
MALFUNCTIONS
If the equipment does not work or functional or structural alterations are noted:
- disconnect it from the power and water mains;
- consult the table below to check the proposed solutions;
If the solution is not found in the table, contact a manufacturer's authorised service centre communicating:
- the nature of the defect;
- the equipment code and serial number found on its specification plate.
Require original spare parts for repairs: the manufacturer cannot be held liable and null and voids the warranty in the event non
original spare parts are used.
To ensure that the appliance is in perfect use and safety conditions, we recommend you have it maintained and serviced by
an authorised service centre at least once a year.
Problem type
The device is fully off.
The equipment does not cool enough
The equipment is very noisy
Do not attempt to repair the equipment on your own. This could cause serious damages to humans, animals and prop-
erty and null and voids the Warranty.
Always request service by a service centre authorised by the manufacturer and request ORIGINAL spare parts.
Before contacting a service centre, check that...
- ...the system is powered and the plug is not disconnected.
- ...it is not effected by an external heat source;
- ...the doors are fully shut;
- ...the condenser filter is not clogged;
- ...the front air vents are not obstructed by objects or dust;
- ...food is well distributed in the cell and do not obstruct venti-
lation in the cell;
- ...the equipment is not overloaded with food (follow your
equipment load instructions).
- ... there are no contacts between the equipment and any other
object or machine;
- ...the equipment is perfectly levelled;
- ...visible screws are well-tightened.
34
Werbung
