Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DISPLAY STATUS
OPERATING STATUS
OFF
The device is not powered
STAND-BY
The device is powered but switched off
ON
The display is powered, switched on and waiting
for an operating cycle to start
RUN
The display is powered, switched on and an oper-
ating cycle is in progress
PROGRAMS THAT CAN BE SET
The programs that can be set are positive blast-chilling and negative blast-chilling with subsequent conservation. Press the "SOFT"
key to use a soft phase before blast-chilling.
1A) Positive blast-chilling
Temperature-based positive blast-chilling and conservation consists of two phases:
- blast-chilling
- conservation
After the blast-chilling, the device automatically switches to conservation.
Before starting the cycle, it is necessary to make sure that the device is "on" and that the keyboard is not locked and that no procedures
are in progress.
To start the cycle, press the "POSITIVE BLAST-CHILLING" key. If parameter "r21" is set to "1", it is possible to switch to a "time-based cycle"
by pressing "POSITIVE BLAST-CHILLING" again.
DISPLAY STATUS
Off
Off
The display shows the temperature inside the cell
If temperature-based blast-chilling is in progress, the
temperature measured by the probe will be displayed
If time-based blast-chilling is in progress, the remaining
time will be displayed
If conservation is in progress, the cell temperature will
be displayed
9
ENGLISH
Werbung
