struers Secotom-10 Gebrauchsanweisung Seite 48

Starting the
Cutting Process
Stopping the
Cutting Process
44
Secotom-10
Instruction Manual

Secure the work piece on the cutting table.

Position the cutting table in the correct place.

Ensure that the cooling fluid nozzles are lowered into position.

Lower the transparent cover.

Using the software display, enter the CUTTING menu and
set/check the correct values.

Start the cutting process by pressing the START
The cut-off wheel will stop rotating automatically when the specified
cut length is reached.

To stop the cutting process, press the STOP button
Control Panel.

button.

on the