Flushing Hose - struers Secotom-10 Gebrauchsanweisung

Flushing Hose

Secotom-10
Instruction Manual
The Secotom-10 comes complete with a flushing system. This
enables the cutting chamber to be rinsed clean of any debris
discarded during the cutting process. Flushing is operated through
the Control Panel buttons.
Do not start the flush function until you have removed
the hose from the fluid nozzles and are pointing it

Remove the hose from the cooling fluid nozzles.

Holding the hose in the cutting chamber, press FLUSH

To stop flushing, press FLUSH
Remember to replace the hose when you have finished flushing the cutting
Warning!
into the cutting chamber.

again or STOP
Important!
chamber.

.

.
13