Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTRUCTION FOR USAGE
All the packaging components, including the foam pad (which cannot
be used to make the refrigerator higher) and
the adhesive tape used for fixing accessories,
must also be removed together. Check the
accessories and information, as well as the
items in the package according to the packing
list in the instructions.
After the power supply is switched on, the refrigerator will continue to
work for a long time in order to reach the predetermined
temperature. During this time, please try to reduce
the number of open doors. For the first and a
longer working time, the noise of the refrigerator
may be slightly larger, and the temperature of both
sides may be higher. After a period of time, when
the refrigerator is fully cooled, it can be used and put into food.
Please do not rush to connect the power supply after the stable
placement and cleanness of the refrigerator. It should be stand for at
least 2 hours, and then switch on the power to ensure the normal
operation of the refrigerator.
Place the refrigerator in the right place (see the foregoing points for
attention), and make a full cleaning of the refrigerator before use (refer
to the latter section of cleaning methods)of the refrigerator.
Note: The power cord should not be pressed
by the refrigerator itself and other heavy
objects, so as to avoid damaging the power
line and causing accidents.
The temperature of refrigerating chamber is usually around 0-10 ℃,
which is used to store fresh food for a short time, such as vegetables,
fruits and beverages, etc..
Refrigerated food should be wrapped in plastic wrap and placed evenly
on the shelf to prevent taint of odor or excessive evaporation of moisture.
The storage of goods in the refrigerating chamber should not be too dense.
It should leave proper space for the cold air circulation.
Hot food should be cooled to room temperature and then put into the fridge.
53
Werbung
