Data For Connecting A Headset - Auerswald COMfortel 1200 Anleitung

Important: Only available for operation on the PBXs COMpact 5000/R and
COMmander 6000/R/RX (with Firmware 6.0A or later): During a call, the
COMfortel 2600 allows you to accept another call and record it simultane-
ously on the local answering machine. When a second call is signalled as
waiting, the PBX reserves the second call channel of the internal S
this function. At this particular time, a second telephone at the same port
cannot initiate a call, accept an incoming call and pick up a call. Simultane-
ous call acceptance and recording by the local answering machine is not
possible while another telephone is on a call at the same port. In order to
ensure that the full scope of functions is available, you should connect only
1 telephone per port.

Data for Connecting a Headset

Microphone power consumption
Microphone sensitivity
Loud speaker impedance
Loud speaker sensitivity at 1 kHz
Sound pressure limit
Receiver jack pin-out
1
2
3
4
Headset jack pin-out
1
2
3
4
Note: The COMfortel 1400 does not support DHSG headsets.
COMfortel 1200/1400 - Firmware Version 1.4 - COMfortel Set 3.6.0 - Setup V01 04/2014
Microphone +
Loudspeaker +
Loudspeaker -
Microphone -
(only COMfortel 1400)
Microphone +
Loud speaker +
Loud speaker -
Microphone -
Important Information
Max. 0.5 mA
45 dB
150 Ohm
19.5 3 dBPa/V
24 dBPa
port for
0
37