Preparing The Telephone For Use As Wall-Mounted Unit - Auerswald COMfortel 1200 Anleitung

Fig. 10: Feet of the casing

Preparing the Telephone for Use as Wall-mounted Unit

Requirements
– Tools: Small screw driver (approx. 4 mm wide)
1.
Insert the screw driver into the slot at the lower edge of the receiver recess
(see
Fig. 11: Inserting a screw driver
COMfortel 1200/1400 - Firmware Version 1.4 - COMfortel Set 3.6.0 - Setup V01 04/2014
Fig. 11).
Preparation
41