Installing The Configuration Software Comfortel Set - Auerswald COMfortel 1200 Anleitung

Commissioning
COMfortel Set (recommended; see

Installing the Configuration Software COMfortel Set

Requirements
– A PC with the following features:
– Installation file (comftelset.exe) stored on a storage medium (PC)
– Active connection of the PC to a PC-port on the PBX (see the instructions
of the PBX)
Note: You can find the required installation file on the Internet (see
www.auerswald.de/service).
1.
Start the installation file (comftelset.exe) on the PC.
2.
Follow the instructions on the screen.
Note: Only COMfortel 1400: During the installation of the COMfortel Set
configuration software, standard announcements for different answering
machine functions are copied to the PC in three different languages (Ger-
man, English and Italian). These are announcements for call acceptance
STANDARD.wav, the announcement for remote access REMOTE.wav and
the announcement for message forwarding FORWARD.wav.
50
Intel Pentium 1 GHz or compatible processor
Windows 7 32/64-bit, Windows 8/8.1 32/64-bit, Mac OS X (as of 10.5),
Linux (as of Kernel 2.6)
RAM memory: 256 MB, recommended 512 MB;
for Windows 7/Windows 8: 1 GB, for 64-bit, 2 GB
37 MB free hard disk space for COMfortel Set
85 MB free hard disk space for Java Runtime
Mouse or compatible pointing device
SVGA graphics card with a resolution of 1024 x 768 and 65536 colours
(16 bit)
The installation software is started.
COMfortel 1200/1400 - Firmware Version 1.4 - COMfortel Set 3.6.0 - Setup V01 04/2014
page 51).