Before Fi Rst Use; Mounting And Removing Accessories - Cleanmaxx Z 09641 Gebrauchsanleitung

EN
Before fi rst use
ATTENTION!
• Risk of suffocation! Keep the packaging material away from children and animals.
1. Unpack all parts and make sure that the product contents are com-
plete (see chapter
there are no transport damages. If you identify damages to the compo-
nents, do not use them (!), instead contact our customer service centre.
Please keep in mind: Residue in the dust bin is attributed to quality controls of
the device!
2. Pull any foils or stickers off of the device and accessories.

Mounting and removing accessories

ATTENTION!
• Before you mount or remove accessories, make sure that the device is switched off
and not connected to the mains supply.
Nozzles and suction hose
Use as a fl oor vacuum cleaner
1
09641_de-en-fr-nl_V2.indb 18 09641_de-en-fr-nl_V2.indb 18
18
"Product contents
• The nozzles are inserted up to the stop point in the suction
opening on the dust bin (9).
• To remove the nozzles or the suction hose, pull it out of the
suction opening.
1. Open the latch (12) for the handle bar on the
motor unit.
2. Push the handle bar into the receptacle on
the motor unit until the latch for the handle
bar locks in.To remove the handle bar, you
must open the latch by pulling it back and
2
then pulling the handle bar out.
and device overview")
ATTENTION! Make sure that
the latch correctly locks into
place to prevent the handle
from slipping out!
and that
21.08.2015 13:44:42 21.08.2015 13:44:42