Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operation

ATTENTION!
Each time before you use the device and the accessories, check them for damages.
If the device, cable, plug, dust fi lters or accessories are visibly damaged do not use
the device.
During use, never hold the nozzles near body parts or animals and do not reach into
them. The device could attach itself to them and you could be injured. If the vacuum
cleaner attaches itself to the fl oor, turn it off immediately.
Only turn the device on once you have ensured that all parts have been completely
mounted and the dust bin and dust fi lters have been correctly inserted.
Always switch the device off if you would like to assemble or disassemble it or change
the accessories.
Empty the dust bin no later than when the MAX mark on the dust bin has been
reached.
Do not in any case vacuum up the following:
– liquids or wet substances (e.g. wet carpet shampoo)
– smouldering ashes, cigarette butts, matches etc.
– fl ammable or ignitable materials
– very fi ne dust (e.g. cement dust), ash or toner
– pointy, hard objects such as larger glass shards
Floor cleaner
1. Depending on whether you would like to use the vacuum cleaner as a handheld vac-
uum cleaner or fl oor vacuum cleaner, insert the handle bar (1) or remove it.
2. Insert the desired adapter nozzle in the suction opening or attach the suction hose
(see chapter "Mounting and removing accessories").
3. Unwind the mains cord to its full length and insert the mains plug in a properly in-
stalled, easily accessible socket.
4. Move the On/Off switch (6) to position I to turn the device on.
5. Move the nozzle over the surface you want to clean.
6. Once you are fi nished vacuuming, switch the On/Off switch to 0 and pull the mains plug.
7. For best performance, empty the dust bin (9) every time after use and clean the dust
fi lters (8) regularly (see chapter "Cleaning and storage").
09641_de-en-fr-nl_V2.indb 19
09641_de-en-fr-nl_V2.indb 19
19
3. Insert one of the cleaning heads, turbo nozzle (10) or fl oor
nozzle (13), in the suction opening on the dust bin.
EN
21.08.2015 13:44:46
21.08.2015 13:44:46

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Vc-s1001bZ 09627

Inhaltsverzeichnis