Before Fi Rst Use - Cleanmaxx Z 06025 Gebrauchsanleitung

EN
• The robotic vacuum cleaner has four cleaning modes and can be confi gured
to automatically start vacuuming at a set time.
• Its sensors allow the device to detect walls or other obstacles and adjust its
path accordingly.
• The sensors on the bottom side of the device detect steps or other
depressions to prevent the device from falling.
• If the rechargeable battery is almost empty, the device will automatically
start to look for the charging station.
Before fi rst use
Before you can use the device, you must:
• unpack the product contents and remove all transport and packaging
elements,
• insert batteries in the remote control,
• set up the charging station,
• charge the device's rechargeable battery.
Unpacking the product contents
ATTENTION!
• Keep children and animals away from the packaging material. Danger of
suffocation exists!
• Unpack all parts and make sure that the product contents are complete (see
chapter "Product contents") and check for any damages from transport.
If you identify damages to the components, do not use them (!), instead
contact the customer service.
• Remove all transport guards if present and the protective foil from the display
of the charging station.
Inserting batteries in the remote control
1. Open the battery compartment cover on the back of the remote control by
pressing the catch together with your thumb and fold up the cover.
2. Insert the batteries in the battery compartment. Make sure that the polarity
is correct as indicated in the compartment (+/–).
3. Put the battery compartment cover back on the battery compartment and
fold it into the closed position. It must audibly lock into place.
When the remote control starts to lose power, the batteries must be replaced.
32