Adjusting The Predefined Position; Completing Adjustments - Fancom iM.60 Anleitung

4.4

Adjusting the PREDEFINED position

Factory setting = 50%. If this is the proper position for you, you don't have to perform the following steps.
1. Set the air inlet with the manual operation switch to the position that should be assumed if mains power is
interrupted.
2. Press the pushbutton until the number
3. Press the pushbutton to confirm the setting. The letter
adjustment was successful.
4.5

Completing adjustments

After adjustment, set the operating switch to Automatic (A) so that normal functioning is possible.
3 appears in the display and then release the pushbutton.
P now appears in the display. This means that the
Gnd
g
14