Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation and operating manual
18
EU Declaration of Conformity (Extract)
that the machine described complies with technological safety standards that were applicable to the equipment in the EUROPEAN
X 300 P, X 400 P, X 500 P, X 520 P, L 500 P, X 820 P, X 1030 P, X 2050 P
The above-mentioned machine matches the model specified on the prototype testing certificate, approved by the following certificate
Commissioning the machine is prohibited until the machine in which this is installed complies as a whole with the regulations of the
2006/42/EC Directive, the corresponding national legislation for implementing the regulations in accordance with national law and the
The valid EN 1808 standard must be applied for the PAM in which the machine is installed.
EN-26
The manufacturer hereby declares
TRACTEL Greifzug GmbH
Scheidtbachstraße 19–21 51469 Bergisch Gladbach
represented by
Dipl.-Ing. Denis Pradon
General Manager
DECLARATION OF CONFORMITY
UNION when it was launched on the market by the manufacturer.
APPLICABLE DIRECTIVES AND STANDARDS:
2006/42/EC; 2006/95/EC; 2004/108/EC;
EN 1808; EN ISO 12100; EN ISO 13849-1
DESIGNATION
Rope traction hoist
APPLICATION
Transport of persons
MODEL
SERIAL NUMBER
Year of manufacture
from 01.2010
numbers
09 085; 09 086; 09 087; 09 088
corresponding declaration of conformity has been issued.
Issuer of the prototype testing certificate:
Fachausschuss MHHW
Test and certification centre BG-PRÜFZERT
Graf-Recke-Straße 69
40239 Düsseldorf
notified as No. 0393 at the European Union Commission
Responsible for the documentation:
Dipl.-Ing. Denis Pradon, Tel.: +49 (0) 2202 1004 0
Bergisch Gladbach, date
G919.6 - 07/2012
Werbung
