Positioning The Welding Wire - Fronius Robacta KD Drive Bedienungsanleitung

Positioning the welding wire

Positioning the IMPORTANT! The welding wire must be positioned centrally beneath the tip of
welding wire
the tungsten electrode at a distance of about 1mm (0.04 in.).
Positioning the welding wire vertically
Positioning the welding wire along the burner
axis
SW 2 mm
(0,08 in.)
SW 5 mm
(0,20 in.)
Positioning the welding wire horizontally
1 mm
(0,04 in.)
Correct distance from the welding wire to the
tungsten electrode
SW 4 mm
(0,16 in.)
41