General
Product concept
The TIG Robacta KD Drive robot hosepack is suitable for steel, CrNi and CuSi
applications. The integrated wire drive is designed to support the KD 7000 cold-
wire feed in use and ensures an even wirefeed with long hosepacks.
Precise wire-feeding is essential for optimum welding results.
Areas of applica-
The TIG Robacta KD Driverobot hosepack is recommended for use in the fol-
tion
lowing situations:
-
-
Scope of supply
Robacta KD Drive scope of supply
26
at precise wirefeed speeds
on hosepacks from 4 metres (13 ft 1.5 ins)
TIG torch head
Drive unit
Cold-wire feed
Spacer
Support
Open-end spanner
8 / 10 mm
(0,31 / 0,39 in.)
Hosepack
(eyample)
Pinion spanner
Allen key
SW 2 mm (0,08 in.)
SW 4 mm (0,16 in.)
SW 5 mm (0,20 in.)