IFM Electronic CR2032 Handbuch Seite 44

C M M
OMPACT ODULE ETAL
Index S-Idx Designation
1010 0 Number of
save options
1
parameters"
1011 0 Number of
restore options
1 "reset for all
parameters"
1014 0
Emergency
1016 0 Number of
heartbeat time
1
heartbeat time
1017 0
heartbeat time
1018 0 Number of
identity objects
1
44
PAGE
CR2032
Type
u8, ro
"Save all u32, rw
u8, ro
u32, rw
COB ID u32, rw
u8, ro
options
Consumer
Consumer u32, rw
Producer u16, rw
u8, ro
Vendor ID u32, ro
Default Description
0x01 Number of the "save" options
0x02 Automatic saving of all changed
parameters OFF/ON.
0 = AutoSave OFF
2 = AutoSave ON
0x01 Number of the "restore" options
0x01 If the string "load" is entered here,
the parameters are assigned to the
factory default values and are valid
after the next reset.
- EMCY is valid (Bit 31 = 0)
0x00000080
+ - EMCY is not valid (Bit 31 = 1)
Node-ID - 11 Bit ID (Bit 29 = 0)
- ID = 0x80 + Node ID
CAN identifier can be changed
by the user.
0x01 Number of the monitored units
0x00 Heartbeat monitoring time for node n.
Monitoring of only one node is
supported.
0x0nntttt = monitoring time [ms]
0x0nntttt = node number
(If nn or tttt = 0, no monitoring is
carried out)
Note:
Node monitoring with "node guarding"
or "heartbeat" is only to be used as an
alternative.
0x00 Time interval [ms] where the inclination
sensor generates a producer heartbeat.
0x01 Device identification
Vendor ID to CiA specification
0x0069666D